JACKPLATE OFFERED FOR KICKER MOTORS

Smaller outboard motors are becoming more popular for auxiliary propulsion or trolling, even on larger boats. Bob's Machine Shop offers a jackplate that provides the option of using a kicker engine on nearly any boat.
At home on fishing boats with large outboards or powering a disabled 40' cruiser back to the slip, the jack will easily handle engines up to 40 hp. Sailboats, which often rely on small auxiliary motors, will also benefit from the jackplate's ability to reduce drag from the engine. Powerboats can even use the kicker jack in no-wake zones, during slow cruising or when navigating in shallow backwaters.
To provide high strength with minimal weight, the jackplate is built with 6061 T-6 aircraft-grade aluminum. Its hydraulic motor is mounted inside the boat for long life and easy maintenance.

Retail price on Bob's kicker jack is $849.

Bob's Machine Shop is a major supplier of engine performance accessories, including jackplates for engines up to 300 hp.

Contact Bob’s Machine Shop at 4314 Raleigh St. Tampa, FL 33619. Phone: 813-247-7040; Fax: 813-247-7041; info@bobsmachine.com; http://www.bobsmachine.com/

FOUR-IN-ONE JACKPLATE ADAPTS TO ANY BOAT

Performance boaters and fishing pros routinely use outboard engine jackplates to maximize speed and performance. Now, jacks have found a home among pleasure boaters as well. Bob's Machine Shop offers its MJ5 Convertible Jackplate to improve the performance of nearly any craft at a low cost.
The jack uses multiple combinations of a 2-1/2" engine offset with or without a six-degree positive wedge; a 5" offset with or without a six-degree negative wedge; or both offsets using no wedge. The best combination of offset and wedge is manually adjusted to provide maximum speed, handling and performance.
For example, a boat with a steep transom angle of 18 degrees can be changed to a 12-degree angle by simply converting the jackplate to the 2-1/2" engine offset with the six-degree wedge. Jacking bolts are used to adjust the vertical height of the jackplate up to 4".
For most lightweight boats, using the 2-1/2" offset alone is normally enough to raise the engine to its highest level without creating excessive bow lift. For outboard motors with a limited trim angle and insufficient bow lift, a 5" offset with no wedge can be used.

Use of the 5" offset and the 6-degree wedge together positions the engine 5-1/2" behind the transom into clean water and away from bubbles and hull turbulence. This helps to stop prop slippage and improves steering.
The standard MJ5 model weighs 19 pounds and is designed for engines with less than 225 hp. The heavy-duty MJH model weighs 27 pounds and is available for off-shore use with engines up to 300 hp. All jackplates are pre-drilled with the standard, BIA bolt pattern and will fit late-model V-6 engines. The jacks can be easily modified to fit any size outboard.
These jacks are constructed of aircraft-grade aluminum and stainless steel, and anodized with a black finish for corrosion resistance. They come with Bob's Machine Shop's limited-lifetime warranty to the original owner.

Retail price of BMS's standard MJ5 model jackplate is $249.95. The heavy-duty MJH version sells for $269.95, and an 8" version is available for $299.95.

Contact Bob’s Machine Shop at 4314 Raleigh St. Tampa, FL 33619. Phone: 813-247-7040; Fax: 813-247-7041; info@bobsmachine.com; http://www.bobsmachine.com/ .

Extreme Series Jack Plates

Bob’s Machine Shop has re engineered their world famous jack plate for new 350+hp engines including V 8’s.Through innovative engineering, BMS’s new Extreme Series (TM) jack plates are their strongest yet.

The Extreme series jack plates are available in all BMS setbacks to suit every application.They are predrilled for the additional mounting holes of the Yamaha F350. Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line.”

Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed, and increased fuel economy from BMS’s new line. We will have a 4, 6, 8, 10, and 12 inch models like our current line, we only have the 10 inch model ready right now.
Please call for price and delivery on the remaining models Order line only: 1-800-966-3493

For more information visit our web site http://www.bobsmachine.com/